LED bar slimline 12v compatible

If you're looking for a powerful LED bar with 12v support, check out this slimline LED light bar widely used in rallying. This driving beam equipped light bar offers you a powerful beam of light. This is because RFT lens technology is combined with 3552 lumens. The driving beam LED bar is 60 watts strong and has combined support for both cars, 4x4 and trucks. The LEDs individually have a 5 watt output. Also, this LED lighting is able to support both 12 volts and 24 volts flawlessly. You do not have to worry about absorbing peak voltages when starting your car. This is because the LED bar has built-in protection that can absorb these electrical surges of up to 36 volts.

Why choose an LD1 series LED bar?

The LD1 light bars from those by TRALERT® offer you exactly what you are looking for in an LED bar 12v. The LED bars are built with the quality components and you will notice this when you put them next to other LED lights. The LEDs used are the Osram brand and provide an excellent bright light display. By combining these quality LEDs with the RFT lens technology, you get the maximum light range out of each individual LED. With this, you can expect a bright light display with, of course, good light distribution. This thin LED bar version is equipped with robust materials and an impact-resistant polycarbonate lens. Fixing these together properly, this LED Light bar is fully waterproof certified (IP68). So even about water damage in your LED bar need not worry.

Other information about this LED light bar

This LED bar can be mounted fantastically in the grill of your truck or car. For example, this LD1 series fits beautifully in the grill of the Volvo FH4 or the Mercedes sprinter. If you are not sure how to mount the lamp? No problem! The 12 volt compatible LED bar comes out of the box with two mounting options. This way there is always an option that fits your desired equipment. To make connecting this lamp to your 12v vehicle as easy as possible, we have incorporated an additional Deutsch Connector on the cable. The Deutsch connector is a fully waterproof connection between the lamp and your car. By providing this LED bar with a slimline coated aluminum housing, it has a reduced resistance and will produce less wind noise. The Polycarbonate lens is mounted in the housing by high quality glue, the lens is flush with the housing. This creates a very sleek and unique look, in addition, any wind noise will also be prevented.

Same technique but just bigger

Should it be that you really like this LED bar but you are actually looking for a larger model? Then check out the larger version of this LED bar 12v. Basically, this LED vehicle light is similar to this LED bulb. However, the larger version has more lumens and a larger mounting area. Because of this larger surface area, this larger LED bar is often mounted on the roof over under the bumper. Tip: Pay attention to the position of the RFT lens when mounting this LED bar. The lens arrangement has a special angle to optimize the light range. For the optimal light beam, make sure the LED bar is not mounted upside down.

What certificates does this LED bar 12v contain?

It goes without saying that TRALERT® makes sure that this LED bar specially designed for cars contains all the necessary certificates. Thus, this lamp is equipped with an E mark, CE mark and of course for public roads, an ECE-R112 mark. Should you have an MOT inspection and you have connected the lights correctly, they can simply remain in place.

Some more advantages for you:

• Only 38mm high slimline designed LED bar
• 9 - 36 volt capable, this allows the bulb to be connected to both your car and your truck
• ECE-R112 certified and EMC suppressed
• 2 mounting options out of the box
• Ideally suitable for mounting in the grill
• RFT lens technology for optimal light distribution.
• Coated aluminum to withstand all weather conditions.

TRALERT® led bars, the most powerful light source mounted on your car

Bring light in the dark, you will take care of that with our LED bars. If you prefer to see this LED lamp in real life, we ask you to make an (online) appointment with our LED lighting specialists. In case you have received this LD1 series but another model is more suitable?No problem, if you return the LED bar within 14 days we will take it back and help you find a better fitting option. Also for this series, if you order before 15:00 you can mount the LED bar on your fleet/cars tomorrow.

FAQ - frequently asked questions

Does this light bar fit on my car?

Yes, in principle this lightbar is universally applicable to your car and is easy to connect by means of the waterproof seal: Deutsch-Connector. Look carefully where you want to mount this lightbar.

May I use this light bar on public roads?

This LED bar may be used on public roads in foggy or situations with very poor visibility. This is because this lighting is ECE-R112 certified and therefore may figure as an (additional) fog light.

How long will it take to mount this LED bar after ordering?

We ship the LED bar the same day, provided it is in stock! This means that if you order before 15:00, you can mount these lights on your desired car or truck the next day.

Search results: #light+bar